Chain Specifications
| Chain Size | Chain Pitch Size | Roller Diameter | Roller Width | Pin Diameter |
| #35 | 3/8" | 3/16" | 3/16" | 1/8" |
| #40 | 1/2" | 5/16" | 5/16" | 5/32" |
| #41 | 1/2" | 5/16" | 1/4" | 1/8" |
| #420 | 1/2" | 5/16" | 1/4" | 5/32" |
Full Answer
Is 41 and 420 chain the same?
What it all boils down to is that a 420 chain roller is 6.35mm wide, while a #41 is 6.38mm. It may be a small difference and not noticeable when fitting, but it's enough to cause binding when under load, and can potentially pop a link if the chain is transmitting a lot of power (which it might be, since the only reason the OP would ask such a question is if they were planning on powering a kart with a bike engine).
What is a 420 chain?
What is a 420 chain? 420 roller chain is a non-standard series roller chain that is a common in stock item for USA Roller Chain. What is a 520 chain? * Motorcycle chains are what transfer power to the rear wheel. * Performing a 520 conversion is a way to use a lighter chain on a bike equipped with a heavier stock chain.
What is 420 roller chain?
420 roller chain is a non-standard series roller chain that is a common in stock item for USA Roller Chain. What sets this chain apart from others is that it is manufactured with solid rollers, and uses heat-treated components for better performance and a higher strength.
What is 450 times 420?
X x Y = 420 There are at least two combinations of two numbers that you can multiply together to get 420. For your convenience, we have made a list of all the combinations of two numbers multiplied by each other that will make 420: 1 x 420 = 420 2 x 210 = 420 3 x 140 = 420 4 x 105 = 420 5 x 84 = 420 6 x 70 = 420 7 x 60 = 420 10 x 42 = 420 12 x ...
What size is 420 roller chain?
Specifications: Chain No.: 420; Pitch: 1/2"; Roller Width: 1/4"; Roller Diameter: 5/16"; Sprocket Thickness: 0.227".
Is 420 chain the same as 40?
Difference between 420 chain and 40 chain Both 420 and 40 chains have the same tensile strength and pitch, the only major difference is the width between the inner plates of #40 is larger than #420 by 1/16″.
How wide is a 420 chain?
420 Non-Standard Roller ChainPart No.420Plate Thickness (T)0.060Overall Width (F)0.288Overall Width (G)0.344Unit of Measure (Inches or Millimeters)in8 more rows
What is a 420 chain?
420 roller chain is a non-standard series roller chain that is a common in stock item for USA Roller Chain. What sets this chain apart from others is that it is manufactured with solid rollers, and uses heat-treated components for better performance and a higher strength.
What is the difference between a 40 41 and 420 chain?
#420 will have more strength than the #41 chain because the side plates will be taller. #40 will be the beefiest chain in this class. This will help with thicker sprockets since there is more room between the side plates. #41 will look just like the #420 chain, but will stand shorter.
How do I know my roller chain size?
Most roller chain has the size stamped right into the side plates. You may see something like "40", "C2080H" or "10B" stamped in, which the industry number that represents the chain size. Old chains will most likely need to be cleaned in order to see the size.
How long is 120 link 420 chain?
10 footElectric Motorsport sells chain in 10 foot lengths which enough for almost any chain drive. The chain size and length should match the drive and driven sprocket you are using. Remember to allow for some chain slack and any possible suspension travel.
What size is #41 chain?
#41 Roller Chain DimensionsSizePitch (P)Roller Diameter (D)41-10.50"0.306"1 more row
What is the standard chain size?
Chain standardsSizePitchMaximum roller diameter500.625 in (15.88 mm)0.400 in (10.16 mm)600.750 in (19.05 mm)0.469 in (11.91 mm)801.000 in (25.40 mm)0.625 in (15.88 mm)1001.250 in (31.75 mm)0.750 in (19.05 mm)11 more rows
How strong is #35 chain?
Size 35 roller chain in stock & ready to ship....ANSI 35 Chain Solutions.Part No.35RUnit of Measure (Inches or Millimeters)inAverage Tensile Strength (Lbs.)2,469Average Weight Per Foot (Lbs./Ft.)0.2159 more rows
What is #35 roller chain?
STENS Roller Chain #35 is a great OEM replacement option to keep your outdoor power equipment running at the top of its game. We offer parts and accessories for a variety of applications such as lawn mowers, snowblowers, chainsaws and more.
Is 41 chain the same as 415?
He says the difference is that the #41 is 1/16th inch wider than a factory 415 chain. He told me that the additional width will actually add life to the chain and sprockets because of lessened "chain side wear". He said no swingarm alignment is perfect.
More items to explore
ATV Carburetor PZ19 with Fuel Filter and 35mm Air Filter for 50cc 70cc 80cc 90cc 110cc 125cc ATV Dirt Pit Bike Taotao Honda CRF By LIAMTU
Product Description
Premium Quality: made of alloy steel, heavy duty and long durabiltiy. Specifications: Chain No.: 420; Pitch: 1/2"; Roller Width: 1/4"; Roller Diameter: 5/16"; Sprocket Thickness: 0.227". Links can be removed to fit virtually any application, like 50cc 70cc 90cc 110cc 125cc ATVs and dirt bikes, Go Kart, Mini Bike, Scooter, Pit Bike, Quad, etc.
Videos
There was a problem filtering reviews right now. Please try again later.
Description & Specifications
Not suitable for bicycles, motorsport products or any on-road vehicles - For industrial applications only.
Installation
The spring clip should be installed where the opening is facing away from the direction of travel. This will help prevent the spring clips from coming off. Like shown in the diagram to the right. Careful not spread the clip opening too far apart. This can make the clip more prone to falling off.