How much does a yard of 4000 PSI concrete cost?
MIX | CONTRACTOR PRICING | LIST PRICE |
2500 PSI | $149.50/cy | $155.00/cy |
3000 PSI | $152.50/cy | $158.00/cy |
3500 PSI | $155.50/cy | $161.00/cy |
4000 PSI | $158.50/cy | $164.00/cy |
Full Answer
How much does 4000 psi concrete cost per yard?
4 rows · 17/02/2020 · How much does a yard of 4000 PSI concrete cost? concrete for interior concrete floors and ...
What is the mix ratio of 3500 psi concrete?
These are my ready mix prices for 4000 psi concrete. If you take a look at the invoices below, you'll see I pay $113.00 per yard for 4000 psi 3/4 aggregate concrete and I pay $117.00 per yard for 4000 psi 3/8 aggregate concrete. As you can see, the price per yard of concrete goes up as the concrete's strength (psi) goes up.
What psi of concrete do you use?
Concrete Prices Per Yard By PSI Mix; PSI Mix Price Per Cubic Yard Delivered; 2,000 PSI, 5.0 Sack Mix: $119: 2,500 PSI, 5.5 Sack Mix: $122: 3,000 PSI, 6.0 Sack Mix: $124: 3,500 PSI, 6.5 Sack Mix: $126: 4,000 PSI, 7.1 Sack Mix: $129: 5,000 PSI, 8.5 Sack Mix: $147
How do you make M20 concrete with 3000 psi?
4 rows · concrete for interior concrete floors and 4000 psi concrete for exterior concrete. The ...
What is 4000 psi concrete used for?
4000 PSI concrete is used for heavy traffic pavement, heavy use floor slabs like shops and warehouses, and concrete footings designed to support heavy loads.
How many bags of cement do I need for 4000 PSI concrete?
There are 94 pounds of cement in a "sack or bag" of cement. That means 4000 psi concrete is also called a 6.5 sack or bag mix.
Is 4000 psi concrete good for driveway?
The typical concrete strength used for a driveway is in the 3000 psi to 4000 psi range, although temperate areas of the country may use lower strengths.
How much is a yard of concrete 5000 PSI?
Concrete Prices Per Yard By PSI MixPSI MixPrice Per Cubic Yard Delivered3,000 PSI, 6.0 Sack Mix$1243,500 PSI, 6.5 Sack Mix$1264,000 PSI, 7.1 Sack Mix$1295,000 PSI, 8.5 Sack Mix$1472 more rows
Is 4000 PSI concrete waterproof?
Also, 4000 psi concrete is borderline waterproof, so it also helps to prevent damp basements. Water vapor will readily move through a block wall, but with nearly waterproof concrete in a poured wall, that vapor transmission is much more difficult.14-Feb-2017
What is the difference between 4000 and 5000 PSI concrete?
Pavement and floor slabs in homes and business are made of concrete at 4,000 PSI and able to withstand traffic and support heavy loads. Concrete that exceeds 5,000 PSI is used in special construction projects that require building materials that are able to withstand heavy impact and extreme wear and tear.09-Sept-2016
Does 4000 psi concrete need rebar?
Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.31-Jul-2020
Does higher psi concrete crack less?
Higher psi concrete will resist cracking more but without addressing the cause of the stress cracks sooner or later the cracks will appear. Addressing cracking in concrete slabs is done long before the mix is poured.
How long does it take 4000 psi concrete to cure?
4000 Psi concrete strength at 28 days:– compressive strength of 4000 psi concrete at 28 days of curing is about 4000 Psi which is approximately equal as 99% of total strength gain in 28 days of curing after casting when tested with 15cm dia and 30cm length of cylinder of cylinder test.
What is 6000 psi concrete used for?
PRODUCT USE PSI 6000 can be used for any application requiring concrete in a minimum thickness of 50 mm (2”), such as slabs, footings, steps, columns, walls and patios.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
What is 8000 psi concrete used for?
It is estimated that a 50-story structure with 4-foot diameter columns using 4000 psi concrete can reduce column diameters by approximately 33% by using 8000 psi concrete (Peterman). High –strength concrete is occasionally used in the construction of highway bridges.