What is the standard size of a 3 hole washer?
8 3-inch Washers Official 3 Hole Washer Board Dimensions: Regulation board size is 12 inches wide by 48 inches long. However, there are variations available out there that range in size from 12″ wide by 32″ long to 16″ wide by 48″ long.
What are the rules of three-hole washer toss?
In three-hole washer toss game, it’s 4 x 1 foot. The foul line is in the same line as the front of the board, in other words on the front edge of a pitching box. If a player steps on or crosses the foul line its consider being a foul shot and it’s worth zero points. Every toss must be from behind the front edge of the board.
What size washer do I need to make a toss board?
Washers should be galvanized and have 2-1/2 inch in diameter and 1/8 inch thick. If you are into DIY projects then take a look at this short video on how to create your own washer toss boards: The main goal of the game is to toss metal washers into a hole.
How do you play 3 hole washers?
How to Play 3 Hole Washers 1 Place your boards 10 feet apart on level ground. 2 Each individual or team throws 4 washers (one at a time), and whoever scores the 21 points first wins the game. More ...
What are the dimensions of a washer toss box?
Washer pits and boxes vary in size and shape, but a standard for one-hole washers is 16 by 16 by 4 inches (410 mm × 410 mm × 100 mm), with a cylindrically-shaped cup ( 41⁄2 in [110 mm] in diameter and 5 in [130 mm] in height) located in its upper surface.
How far apart should washer toss boxes be?
20 feetGame Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play. Games can be played 1 vs 1 or teams of 2 vs 2.
How do you make a washer toss board?
0:269:21How To Build A Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three andMoreSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three and a half inches on my table saw to simplify things you could also just use a 2 by. 4.
Where do you stand to throw the washers in three hole platform washers?
Partners shall stand at opposite Washers platforms, each on the same side. Each team will have 3 washers of one color; all 6 washers begin at the same end. the highest point hole will toss first. This is called the "Diddle".
What are the official rules for washer toss?
Whoever gets closer to the box will be the first to toss; this is called the diddle. To start the washer toss game match, player 1 will throw all four of their washers back-to-back. Any washers that land inside the hole are worth 3 points, and washers that land in the bottom of the box are worth 1 point.
How do you score washers?
Scoring in washers is simple! A team earns one point if a washer lands inside the box. Three points are earned if a washer is inside the cup. Points cancel out so if you both land in the cup no points are scores.
How do I make a hillbilly horseshoe?
0:058:34How To Build - Washer Board (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you couldMoreFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you could probably get by with a half of a sheet. But. It's pretty inexpensive. So I just bought a whole sheet.
How do you run a 3 hole washer toss?
Each player will throw their washers from the same side, to the opposite board. The first player will throw their 3 washers; the second player will then throw their 3 washers to complete one round. After all washers have been tossed, and scores are noted, players will move to the opposite board to continue play.
How many washers are tossed in a cornhole?
Like in cornhole, players should maintain the same tossing side during the whole match. Each team gets 3 washers, so in total 6 washers are tossed in each round (2 players and 3 washers).
What is a bust in washer toss?
Bust. The bust is a term used when a team or player exceeds 21 points. As you already know in washer toss players need to score exactly 21 points. Once a player busts, the score is automatically reverted to the previous results and the opponent has turned.
How many points does a washer get on a washers board?
Players alternately throw washers onto a washers board. Each board, depending on the game type, has 1 or 3 holes in which players can throw washers. If a washer lands in the hole it’s worth 3 points and if it lands in the box its worth 1 point. The player or team who first reaches 21 points wins the game.
How many washers can you throw in a round?
Each team can throw 3 washers in each round. So in total 6 washers are thrown per round. Each team must have a different colour of washers, so it can be easily spotted when it’s on the board. In order to determine which team is going to throw first, each player should toss 1 washer to the board.
How long is a washer board?
According to official rules, each board needs to be 4 feet long and 1 foot wide.
Where is the washer box in baseball?
The washer that was inadequately thrown must be removed from the playing field immediately. Pitching boxes are located on the left and right side of each washer box. Washers are allowed to flip, bounce and roll before scoring in a hole. However, a washer may not roll, bounce or flip off a person or ground.
How many washers are there in a skunk game?
Sometimes, 4 washers/player or team are used instead of 3 washers. If a team has 11 scores and the second team has a “zero” score, it is called Skunk game. In such a situation, the team at zero points automatically loses the game. The game does not move towards 21 scores.
What happens after all washers are tossed?
After all washers have been tossed, and scores are noted, players will move to the opposite board to continue play. Team members will throw from opposite boards. The first player from Team One will toss three washers; the first player from Team Two will toss their 3 washer to the same board. Note scores.
How many washers do you throw in a game of chess?
For a Two Player Game (1-on-1): Each player will throw their washers from the same side, to the opposite board. The first player will throw their 3 washers; the second player will then throw their 3 washers to complete one round. After all washers have been tossed, and scores are noted, players will move to the opposite board to continue play.
How far apart should you place washer boards?
Place your Washer Boards 10’ apart; which is easily measured by the 10’ connecting rope. Six metal washers are provided with your game. Teams may be distinguished by a small hole drilled through three of the washers. Original Washers may be played on a level lawn, on the beach, camping, or anyplace else you wish to play.
How to score a washer board?
Here is how to score using the official 3 hole washer board rules. 1) One point is scored for the hole closest to the front of the board. 2) Three points are scored for the center hole. 3) Five points are scored for the last hole on the board. To score points the washer must fall entirely into the hole.
What is washers game?
The Washers Game is a fun tossing game that is perfect for backyard parties and tailgates. All you need is a good quality washers game board and some washers to play. Read on if you're interested in learning about the 3 hole washers game rules.
Where to play original washers?
Original Washers may be played on a level lawn, on the beach, camping, or anyplace else you wish to play. Initial Play: Each individual, or one member of each team, throws a washer. Whoever gets the highest points, or gets closest to a hole, chooses if they want go first or second.
How many washers do you need to throw in a round of golf?
The first player throws both of them, one at a time. The scoring is determined by the proximity of the washer to the cup. Only one player can score per round.
How far apart should you measure a washer pit?
Washer pit distance. The distance between the two pits is completely up to you. Most players recommend that you measure a distance of 25 ’ from the center of one cup to the center of the other. Of course, the greater the distance, the more difficult the game.
How many washers per player?
Basically, the board consists of four holes close to each corner of the board with one hole in the middle. You’ll need to use six washers per player.
How many points do you get in a washer board game?
Here are some basic rules for playing three-hole washer board game: If you get your washer in the hole closest to you, you’ll get one point. The middle hole is worth three points and the hole farthest from you is five points.
How many bags are in a pitcher box?
The same rules apply as for the singles play and each player has 4 bags to pitch. Official rules for playing washers state that the player must pitch with the underhand throw.
How far should a box be from a thrower?
The distance between the boxes should be approximately 20 feet. Most of the time players determine the distance by using a string, a rope or a chain attached to the front of both boxes. The thrower should be standing next to or behind one box while tossing washers toward the other.
How far should a baseball pit be?
You’ll be able to measure the distance we’ve mentioned starting from cup centers. The “official” distance should be 25 feet.
Playing Field
Equipment
Gameplay
Scoring
- It is players responsibility to keep the score after each round. This game uses the cancellation type of scoring, which means that a score is calculated after each round. Basically, if you hit the same hole that you opponent hit, you cancel their score. Which means that after each round points are cancelled against each team. The team who has the highest round score adds the poi…
Tournament Rules
- All equipment, including washers and boards, should be supplied by the tournament organizer. In order to ensure standardized tournament, players are not allowed to bring their own personal equipment. Washer toss tournaments can be organized in the same way as cornhole tournaments. You can play double elimination, single-elimination or round-robin. Use tournamen…
Rules Variations
- In different regions of the world, the 3-Hole Washers is played with a variation in distances.
- Sometimes, 4 washers/player or team are used instead of 3 washers.
- If a team has 11 scores and the second team has a “zero” score, it is called Skunk game. In such a situation, the team at zero points automatically loses the game. The game does not move towards 21...
- In different regions of the world, the 3-Hole Washers is played with a variation in distances.
- Sometimes, 4 washers/player or team are used instead of 3 washers.
- If a team has 11 scores and the second team has a “zero” score, it is called Skunk game. In such a situation, the team at zero points automatically loses the game. The game does not move towards 21...
- Sometimes, the players decide before the game to play by the following rule: “scoring more than 21 points instead of exact 21 points will make a player return to 11 points.”
Frequently Asked Questions
- What is the difference between cornhole and washer toss game? Washer toss game is derived from cornhole. All board and bags games have their roots in cornhole. Cornhole is played with 4 bags for each team, but a washer is played with 3 washers. The number of boards is the same, but the cornhole board has one hole, but washer toss game boards have 3 holes. Its board is 1 f…