Full Answer
How big is a 3-hole washer board?
Don’t rush to it, though, try to have fun along the way! The standard size for a three-hole washer board is 40’’x16’’. The board has three holes of 4’’ in diameter. Each hole’s center is 12’’ from the center of the next hole.
What are the rules for 3 hole washers?
Rules for 3 Hole Washers Game In order for a throw to count, the washer must completely fall into the hole. If a washer is knocked into the hole (by a member of either team), the point goes to the player who originally threw the washer. You can cancel out the apposing team’s score in the same round by out scoring them.
Where are 3 hole washers game boards made?
Our 3 hole washers game boards are hand made by craftsmen in the USA in a wood shop. Go with the Washers Game Company, and you know you'll be getting the best washers game for sale anywhere. This washers toss game will last you for many years and has a 100% satisfaction guarantee.
What size washer board do I need for my washing machine?
There are several versions of washer boards available. Depending on your personal preference you can choose plain wooden board, carpeted board or rubber covered board if you want to add bounce effect. According to official rules, each board needs to be 4 feet long and 1 foot wide.
What are the dimensions of a 3 hole washer board?
Official 3 Hole Washer Board Dimensions: Regulation board size is 12 inches wide by 48 inches long. However, there are variations available out there that range in size from 12″ wide by 32″ long to 16″ wide by 48″ long.
What size are washers for washer boards?
Two sets of three standard 3" washers are required and each set must be of a different color or somehow marked differently. Contestants may use their own washers as long as each washer is at least 2 15/16" in diameter and weighs 4 1/2 ounces or less.
How far apart should washer boards be?
about 20 feet apartWasher boards and boxes are typically positioned on flat surfaces about 20 feet apart. If you would like to give yourself and your friends more of a challenge, you can space them out even farther. Washer toss can be played in teams of one or two players.
How do you make a washer board set?
0:343:31How to Make Washer Boards! (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipI use scrap wood I found laying around as the plywood support one side friend using wood glue andMoreI use scrap wood I found laying around as the plywood support one side friend using wood glue and screws to secure every piece cut 1 by 3s can also work for this.
What is the distance for washer toss?
20 feetGame Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play.
Where do you stand to throw the washers in three hole platform washers?
Partners shall stand at opposite Washers platforms, each on the same side. Each team will have 3 washers of one color; all 6 washers begin at the same end. the highest point hole will toss first. This is called the "Diddle".
How do you score washers?
Scoring in washers is simple! A team earns one point if a washer lands inside the box. Three points are earned if a washer is inside the cup. Points cancel out so if you both land in the cup no points are scores.
How do I make a hillbilly horseshoe?
0:058:34How To Build - Washer Board (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you couldMoreFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you could probably get by with a half of a sheet. But. It's pretty inexpensive. So I just bought a whole sheet.
How are washers sized?
Washer size refers to the diameter of the hardware's hole and correlates with the bolt diameter. The outside diameter (OD) of a washer is always wider than the fastener. Most manufacturers usually specify size and OD in fractional inches, although some occasionally use decimal measurements.
What sizes do washers come in?
Compact washers are normally 2.30 to 2.45 cubic feet, while standard and high efficiency top-load washers may range from 3.1 to 4 cubic feet. If you need one with a larger capacity, check the front loaders. They can range from 4.2 to 4.5 cubic feet. Sometimes, they can go as big as 5 cubic feet.
How do I know what size washer I have?
Measure the depth inside the washer with a measuring tape. ... Measure the diameter of the tub. ... Divide the diameter by two, and square it. ... Multiply the number calculated in Step 3 by the depth of the tub. ... Multiply the number calculated in Step 4 by pi to determine the capacity.
What size washer do I need for a 3/8 bolt?
Flat Washer DimensionsBolt SizeUSSSAE5/160.8750.3443/81.0000.4067/161.2500.4691/21.3750.53123 more rows
How long is a washer board?
According to official rules, each board needs to be 4 feet long and 1 foot wide.
How many holes are there in a 3 hole board?
According to official rules, each board needs to be 4 feet long and 1 foot wide. Since this is a 3-hole type of game, logically, each board needs to have 3 separate holes with 12-inch space between each hole.
How many points does a washer get on a washers board?
Players alternately throw washers onto a washers board. Each board, depending on the game type, has 1 or 3 holes in which players can throw washers. If a washer lands in the hole it’s worth 3 points and if it lands in the box its worth 1 point. The player or team who first reaches 21 points wins the game.
How many washers can you throw in a round?
Each team can throw 3 washers in each round. So in total 6 washers are thrown per round. Each team must have a different colour of washers, so it can be easily spotted when it’s on the board. In order to determine which team is going to throw first, each player should toss 1 washer to the board.
How many washers are tossed in a cornhole?
Like in cornhole, players should maintain the same tossing side during the whole match. Each team gets 3 washers, so in total 6 washers are tossed in each round (2 players and 3 washers).
What is a bust in washer toss?
Bust. The bust is a term used when a team or player exceeds 21 points. As you already know in washer toss players need to score exactly 21 points. Once a player busts, the score is automatically reverted to the previous results and the opponent has turned.
Where is the washer box in baseball?
The washer that was inadequately thrown must be removed from the playing field immediately. Pitching boxes are located on the left and right side of each washer box. Washers are allowed to flip, bounce and roll before scoring in a hole. However, a washer may not roll, bounce or flip off a person or ground.
How many washers do you need to throw in a round of golf?
The first player throws both of them, one at a time. The scoring is determined by the proximity of the washer to the cup. Only one player can score per round.
How many washers per player?
Basically, the board consists of four holes close to each corner of the board with one hole in the middle. You’ll need to use six washers per player.
How far apart should you measure a washer pit?
Washer pit distance. The distance between the two pits is completely up to you. Most players recommend that you measure a distance of 25 ’ from the center of one cup to the center of the other. Of course, the greater the distance, the more difficult the game.
How many points do you get in a washer board game?
Here are some basic rules for playing three-hole washer board game: If you get your washer in the hole closest to you, you’ll get one point. The middle hole is worth three points and the hole farthest from you is five points.
How many bags are in a pitcher box?
The same rules apply as for the singles play and each player has 4 bags to pitch. Official rules for playing washers state that the player must pitch with the underhand throw.
How far should a box be from a thrower?
The distance between the boxes should be approximately 20 feet. Most of the time players determine the distance by using a string, a rope or a chain attached to the front of both boxes. The thrower should be standing next to or behind one box while tossing washers toward the other.
How far should a baseball pit be?
You’ll be able to measure the distance we’ve mentioned starting from cup centers. The “official” distance should be 25 feet.
How far apart are the washers on a board?
The two boards are spaced 10 feet apart from each other. The washers are standard 1 inch washers (they are 2½ wide with a 1 inch hole in the center). How we play. Two players or teams of two. Two players start by throwing three washers each from the same side of the board.
What happens when you trow your washers?
This means that after both players trow their washers the lower score is subtracted from the higher one. If both players score the same amount of points no points are awarded. For example if player one score 4 points then player two scores 5, player two gets 1 point. Player two "washed" 4 of player one's points.
How many points are in the first hole in golf?
The first hole is worth 1 point the middle 3 points and the farthest worth 5 points. Players take turns throwing all 3 washers consecutively. After both players have thrown, the player with most points throws first from the opposite board. Teams would split up one on each end of the boards.
Playing Field
Equipment
Gameplay
Scoring
- It is players responsibility to keep the score after each round. This game uses the cancellation type of scoring, which means that a score is calculated after each round. Basically, if you hit the same hole that you opponent hit, you cancel their score. Which means that after each round points are cancelled against each team. The team who has the highest round score adds the poi…
Tournament Rules
- All equipment, including washers and boards, should be supplied by the tournament organizer. In order to ensure standardized tournament, players are not allowed to bring their own personal equipment. Washer toss tournaments can be organized in the same way as cornhole tournaments. You can play double elimination, single-elimination or round-robin. Use tournamen…
Rules Variations
- In different regions of the world, the 3-Hole Washers is played with a variation in distances.
- Sometimes, 4 washers/player or team are used instead of 3 washers.
- If a team has 11 scores and the second team has a “zero” score, it is called Skunk game. In such a situation, the team at zero points automatically loses the game. The game does not move towards 21...
- In different regions of the world, the 3-Hole Washers is played with a variation in distances.
- Sometimes, 4 washers/player or team are used instead of 3 washers.
- If a team has 11 scores and the second team has a “zero” score, it is called Skunk game. In such a situation, the team at zero points automatically loses the game. The game does not move towards 21...
- Sometimes, the players decide before the game to play by the following rule: “scoring more than 21 points instead of exact 21 points will make a player return to 11 points.”
Frequently Asked Questions
- What is the difference between cornhole and washer toss game? Washer toss game is derived from cornhole. All board and bags games have their roots in cornhole. Cornhole is played with 4 bags for each team, but a washer is played with 3 washers. The number of boards is the same, but the cornhole board has one hole, but washer toss game boards have 3 holes. Its board is 1 f…