What are the dimensions of a 3 hole washer board?
Learn more about our 3 hole washer boards below or check out the official rules of the 3 hole washer toss game. Dimensions: Each board is 32x13x3 inches. These washer game boards come in three finishes.
What are the other names for 3 hole washers?
What are the other names for 3 Hole Washers? This game goes by many names–Holy Boards, Holy Board Game, Washer Toss, Texas Horseshoes, Washer Game, Washer Board Game, Three Hole Washer Game, and Washers. Whatever you call it, make these easy boards to have a ton of backyard family game fun.
Where are 3 hole washers game boards made?
Our 3 hole washers game boards are hand made by craftsmen in the USA in a wood shop. Go with the Washers Game Company, and you know you'll be getting the best washers game for sale anywhere. This washers toss game will last you for many years and has a 100% satisfaction guarantee.
How do you play 3 hole washers?
How to Play 3 Hole Washers 1 Place your boards 10 feet apart on level ground. 2 Each individual or team throws 4 washers (one at a time), and whoever scores the 21 points first wins the game. More ...
What are the dimensions of a 3 hole washer board?
Official 3 Hole Washer Board Dimensions: Regulation board size is 12 inches wide by 48 inches long. However, there are variations available out there that range in size from 12″ wide by 32″ long to 16″ wide by 48″ long.
How do you make a 3 hole washer board?
0:103:31How to Make Washer Boards! (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the plywood and cut it to forty six and three-quarter inches long and 14 and three-quarterMoreTake the plywood and cut it to forty six and three-quarter inches long and 14 and three-quarter inches wide because the one by fours are going to bring the outside of the.
How far apart do washer boards need to be?
about 20 feet apartWasher boards and boxes are typically positioned on flat surfaces about 20 feet apart. If you would like to give yourself and your friends more of a challenge, you can space them out even farther. Washer toss can be played in teams of one or two players.
What size are washers for washer boards?
Two sets of three standard 3" washers are required and each set must be of a different color or somehow marked differently. Contestants may use their own washers as long as each washer is at least 2 15/16" in diameter and weighs 4 1/2 ounces or less.
What is the distance for washer toss?
20 feetGame Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play.
Where do you stand to throw the washers in three hole platform washers?
Partners shall stand at opposite Washers platforms, each on the same side. Each team will have 3 washers of one color; all 6 washers begin at the same end. the highest point hole will toss first. This is called the "Diddle".
What are the point values for each hole in three hole platform washers?
Here is how to score using the official 3 hole washer board rules. 1) One point is scored for the hole closest to the front of the board. 2) Three points are scored for the center hole. 3) Five points are scored for the last hole on the board.
How do you make a washer toss board?
0:269:21How To Build A Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three andMoreSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three and a half inches on my table saw to simplify things you could also just use a 2 by. 4.
How do I make a hillbilly horseshoe?
0:058:34How To Build - Washer Board (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you couldMoreFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you could probably get by with a half of a sheet. But. It's pretty inexpensive. So I just bought a whole sheet.
How do you score washers?
Scoring in washers is simple! A team earns one point if a washer lands inside the box. Three points are earned if a washer is inside the cup. Points cancel out so if you both land in the cup no points are scores.
How many washers do you throw in a round?
Each player throws their washers from the same side over to the opposite board (facing longways). The player who throws first will throw all four washers, then the second player throws their washers. The player that scores the most in each round gets to throw first on the following round.
How many washers does a player throw in a game?
First player throws four washers, then the first player from the opposite team throws their four washers. Opposing team members now pick up the washers and throw them back in the same fashion. The team that scores the most in each round gets to throw first on the following round.
How to attach eye bolts to a 2x4?
The eye bolts attach to the bottom of the board (the short end 2×4). Drill a pilot hole into the center of the 2×4 frame and thread in the eye bolt. Tie the optional rope. Set the the boards 10′ apart, with the eye bolts facing each other. Tie the rope to the eye bolts of both boards.
Can you cut half sheets at a hardware store?
Most hardware stores will also sell half-sheets, or can custom cut for a small fee. I use either a table saw or skill saw for this cut. However if you’re not comfortable with power saws or limited on transportation space, take advantage of the the cut services from your local hardware store.
How long is a washer board?
According to official rules, each board needs to be 4 feet long and 1 foot wide.
How many holes are there in a 3 hole board?
According to official rules, each board needs to be 4 feet long and 1 foot wide. Since this is a 3-hole type of game, logically, each board needs to have 3 separate holes with 12-inch space between each hole.
How many points does a washer get on a washers board?
Players alternately throw washers onto a washers board. Each board, depending on the game type, has 1 or 3 holes in which players can throw washers. If a washer lands in the hole it’s worth 3 points and if it lands in the box its worth 1 point. The player or team who first reaches 21 points wins the game.
How many washers can you throw in a round?
Each team can throw 3 washers in each round. So in total 6 washers are thrown per round. Each team must have a different colour of washers, so it can be easily spotted when it’s on the board. In order to determine which team is going to throw first, each player should toss 1 washer to the board.
How many washers are tossed in a cornhole?
Like in cornhole, players should maintain the same tossing side during the whole match. Each team gets 3 washers, so in total 6 washers are tossed in each round (2 players and 3 washers).
What is a bust in washer toss?
Bust. The bust is a term used when a team or player exceeds 21 points. As you already know in washer toss players need to score exactly 21 points. Once a player busts, the score is automatically reverted to the previous results and the opponent has turned.
Where is the washer box in baseball?
The washer that was inadequately thrown must be removed from the playing field immediately. Pitching boxes are located on the left and right side of each washer box. Washers are allowed to flip, bounce and roll before scoring in a hole. However, a washer may not roll, bounce or flip off a person or ground.
Playing Field
Equipment
Gameplay
Scoring
- It is players responsibility to keep the score after each round. This game uses the cancellation type of scoring, which means that a score is calculated after each round. Basically, if you hit the same hole that you opponent hit, you cancel their score. Which means that after each round points are cancelled against each team. The team who has the highest round score adds the poi…
Tournament Rules
- All equipment, including washers and boards, should be supplied by the tournament organizer. In order to ensure standardized tournament, players are not allowed to bring their own personal equipment. Washer toss tournaments can be organized in the same way as cornhole tournaments. You can play double elimination, single-elimination or round-robin. Use tournamen…
Rules Variations
- In different regions of the world, the 3-Hole Washers is played with a variation in distances.
- Sometimes, 4 washers/player or team are used instead of 3 washers.
- If a team has 11 scores and the second team has a “zero” score, it is called Skunk game. In such a situation, the team at zero points automatically loses the game. The game does not move towards 21...
- In different regions of the world, the 3-Hole Washers is played with a variation in distances.
- Sometimes, 4 washers/player or team are used instead of 3 washers.
- If a team has 11 scores and the second team has a “zero” score, it is called Skunk game. In such a situation, the team at zero points automatically loses the game. The game does not move towards 21...
- Sometimes, the players decide before the game to play by the following rule: “scoring more than 21 points instead of exact 21 points will make a player return to 11 points.”
Frequently Asked Questions
- What is the difference between cornhole and washer toss game? Washer toss game is derived from cornhole. All board and bags games have their roots in cornhole. Cornhole is played with 4 bags for each team, but a washer is played with 3 washers. The number of boards is the same, but the cornhole board has one hole, but washer toss game boards have 3 holes. Its board is 1 f…