What type of tubing is used for fuel lines?
Aluminum tubing can be used for everything from fuel, transmission, and oil supply lines, even vacuum and coolant lines.
How much horsepower will a 3/8 fuel line support?
A 3/8”id fuel line can easily support 600 HP given sufficient “pump head”! Given a big enough pump a 3/8” steel line could support 1000 HP. The simple way to know is to install an electronic fuel pressure gauge. If the pressure falls as the engine RPM's go up you need more pump head.
What size is 3/8 fuel line?
Understanding Fuel Line Fittings: Straight Thread (and AN) vs. Tapered ThreadAN SizeTube or Hose ODTube or Hose ID-4¼”.172”-55/16”.062”-63/8”.297”-81/2”.391”9 more rows•May 6, 2015
Is vinyl tubing good for fuel line?
No - unless specially made for this purpose do not use plain ordinary vinyl tubing for gasoline and other hydrocarbons.
What diameter fuel line should I use?
Recommended Size, Based on HorsepowerRecommended Fuel Line Size (from the tank to the pump)Engine OutputSize (inches)Size (AN)350 hp or less5/16 in.-5350-450 hp3/8 in.-6450-650 hp1/2 in.-81 more row•Sep 16, 2017
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
Which is bigger 5/16 fuel line or 3 8?
The 5/16″ fuel line is actually perfect for smaller outboards. Being a little smaller than the 3/8″ hose, it works great for little kicker motors, and sailboat outboard engines.
What is 3/8 on a gas gauge?
So, it means that this Tank had 6-gallons (3/8) and has added 3-gallons to achieve 9-gallons (9/16) out of 16-gallon (full tank capacity). Good luck to you.
Does fuel line size affect pressure?
Shows the relationship between measured pressure drop as a function of flow rate, for four different fuel lines (two different sizes at two different lengths). Every fuel line experiences pressure loss depending on fuel line length, and fuel flow rate.
What is the best metal for fuel line?
Most cars come from the factory with Metal Lines because they hold up better than any soft material. They are usually made from stainless, aluminum or coated steel tube. Metal is the best material for fuel lines. However, it can be difficult to fabricate.
Is polyethylene tubing safe for gasoline?
Polyethylene is the most common plastic in the world. Polyethylene tubing is a flexible, lightweight and highly durable substance used across many industries. It is safe to use with a wide variety of chemicals, gases, fluids and materials.
What kind of hose is fuel safe?
Options for fuel hoses: Two materials, which are better suited for fuel hose applications, are Nitrile Rubber and PTFE. Nitrile rubber (NBR) is an oil-resistant synthetic rubber.
What is silicone tubing?
Made of silicone, this tubing has a metal additive that will set off metal detectors to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs.
What are rubber tubes made of?
Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.
What is UL 94 V-2?
Rated UL 94 V- 2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.
Why is hard tubing bagged?
Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.
What is brass 330 used for?
It's used for fire station poles, pump cylinder lines, and plumbing accessories.
What is tight braiding?
Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
Prime Line Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Prime Line Fuel Tubing
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.