Top Answer To "relearn" the Ford F-150's throttle body, move the car to a flat surface, set the parking brake and put the gear shift into park. Switch off all accessories. Fire the engine and run until it reaches operating temperatures and let idle for at least 1 minute.
Full Answer
What does the throttle body do on a Ford F-150?
The throttle body is an important part of determining how hard the engine in a truck is working, and this is especially important if you’re using your Ford F-150 to haul large loads.
When do I need to relearn my Ford throttle body?
Performing a Ford throttle body relearn is required after replacing your Ford electronic throttle body or after disconnecting the battery. This is necessary to set a new baseline idle. Beginning in the early 2000s, numerous automobile manufacturers, notably Ford, began adding electronic throttle bodies that operated entirely by wire.
How to open throttle position sensor on a Ford F150?
There is a sequence of turning the key on and off and pressing the gas pedal down to open up the throttle position sensor on the f 150. The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.
How do you train the throttle body on a Ford Fusion?
Hot The Ford Fusion’s throttle body must be “re-trained” by parking the vehicle on a flat surface, applying the parking brake, and shifting the transmission into park. Turn off all of your accessories. Start the engine and let it run until it reaches operating temperatures, then turn off the engine and let it idle for at least one minute.
How do you recalibrate a throttle body?
Accelerator Pedal Release Position Learning Procedure. Make sure that the accelerator pedal is fully released. Turn ignition switch “ON” and wait at least 2 seconds. Turn ignition switch “OFF” wait at least 10 seconds. Turn ignition switch “ON” and wait at least 2 seconds.
Does a new throttle body need to be reprogrammed?
In fact, on some engines a new throttle body needs to be programmed with a factory, or equivalent, scan tool. The technician cannot even clean the carbon out of the throttle body in some cases without setting a “check engine” light.
How do I reset my throttle position sensor?
This step can also be necessary when you install a new sensor. The easiest way to reset your throttle position sensor is to unhook the negative cable from your battery for up to five minutes or to remove the fuse for your engine control module.
Do you have to calibrate a throttle body?
Once you have fitted a Throttle Position Sensor, or TPS, you will need to calibrate it from within MEITE. The signal on the chosen pin should sweep from approximately zero to five volts as you move the throttle from fully closed to fully open.
What happens when you unplug throttle position sensor?
The TPS as we call it is one of the most important sensors on the engine. Without it, the computer has no way of knowing when you push down on the gas or open the throttle. Best it can do it watch some other sensors and make some estimated guesses. On some cars, it may burp just as you unplug it if it’s running.
How do you relearn a Ford transmission?
With engine idling and transmission at operating temperature, apply foot brake and place transmission in Neutral. Wait 3 seconds, move shifter to D and wait 3 more seconds. Repeat 5 times, and move shifter to Park. Apply foot brake, move shifter to Neutral and wait 3 seconds.
How do you reset the computer on a Ford f150?
Loosen the lock nut located on the negative battery cable connector with a socket and ratchet. Pull the connector off the negative battery terminal. Wait for 20 minutes while the PCM bleeds off the electricity it stores for backup power. Once the power drains from the PCM, it resets.
What is the throttle body on a Ford F150?
What Is the Throttle Body in the Ford F-150? The purpose of the throttle body is simple: It works to restrict the amount of air that can get into the truck’s engine. Let’s take a look at how the throttle body functions. The throttle body is an important part of determining how hard the engine in a truck is working, ...
Why is the throttle body important?
The throttle body is an important part of determining how hard the engine in a truck is working, and this is especially important if you’re using your Ford F-150 to haul large loads. It’s easy to see that the throttle body is full of many small, moving parts, and it’s essential that they all work together correctly to allow the engine to get ...
Why does my F150 jerk back and forth?
NHTSA Complaint ID: 11352818. The Ford F-150 can buck, or jerk back and forth, while it’s running due to a faulty throttle body. This can be dangerous and cause a hazard both for the people in the car and others on the road. Replacing the throttle body usually fixes the problem.
Why does my F150 shift so rough?
Many Ford F-150 owners have noticed that issues with the throttle body cause the truck to shift in a rough way. While this isn’t often dangerous, it can be uncomfortable for the driver. Rough shifting can be indicative that further issues are likely with the throttle body.
What is the NHTSA complaint ID for a Ford F150?
NHTSA Complaint ID: 11341980. Some Ford F-150 owners have experienced the vehicle losing power while in motion, even though the engine is still running. This can be extremely dangerous, especially in high traffic situations.
Is the F150 a good fit?
Yes, and here’s what you need to know: Thankfully, we’ll go over these issues so that you have a better understanding of what throttle body issues could mean for your vehicle. This will help you make an informed decision on whether the Ford F-150 is a good fit for your next vehicle purchase.
How much does it cost to replace a throttle position sensor on a F150?
The average cost for replacement $120-$210, the new one is around $18 to $49.
How many volts does a TPS sensor have?
The voltage during TPS closeness and its wide opening is around 9v and 4 volts. It will appear on your sensor computer screen. In both throttle conditions, the voltage goes increasing.