Hit the lock button once, then hold the remote start button (Usually shaped like an arrow) for at least 2 seconds or until the turn signal lamps flash. Keep holding and the vehicle should start. Vehicle Not in ‘Park’ As a safety precaution, the remote start system will only work if the car is in ‘Park’.
Full Answer
How can I start a Chevy Malibu without the key?
The cost depends on a number of factors:
- The type of key you need
- The car’s year of manufacture
- Time of day & your location
- Where you get a key replacement (dealer, automotive locksmith, online, etc.)
- Availability of code to cut a new key
- Original ignition or not
How to fix AC in a Chevy Malibu?
What are the common symptoms indicating you need an Car AC Repair?
- AC is not working.
- AC is not blowing cold air.
- Clicking noise from the engine compartment.
Why does your Chevy Malibu not start?
Chevrolet Malibu owners have reported 83 problems related to engine shut off without warning (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Chevrolet Malibu based on all problems reported for the Malibu.
How to deactivate start stop Chevy Malibu?
Chevrolet decided not to make a switch or button for those who want to disable the Auto Stop/Start feature. However, there is a workaround that will work to shut it off. Follow these steps: Start the Equinox and shift the gear to “L“. This puts the transmission into “Manual Mode“.
What would causes a remote start to stop working?
Reasons Your Remote Start is Not Working: Vehicle Not in 'Park' Too Many Remote Start Attempts. Coolant and Oil Pressure. Unlatched Hood.
How do I reset my remote starter?
Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the "off" position (or press the start button again). Repeat the on-off cycle three more times—you'll do four in total.
How does the remote start work on a 2011 Chevy Malibu?
0:141:39We're gonna hit the lock button once and then immediately press and hold the circular button belowMoreWe're gonna hit the lock button once and then immediately press and hold the circular button below it. After about five seconds the Carl come on if you need any indicator.
How do you reset the remote on a Chevy Malibu?
On the Chevy key fob, press and hold the “Unlock” and “Lock” buttons at the same time until you hear the door lock and unlock again. This means you're all set. Re-insert the programmed key back into the ignition to the “On” position to finish the Chevy key fob programming process.
How do I program my remote start for my Chevy key fob?
On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.
Where is the remote start module located?
The control module will be a black box typically mounted under the drivers side dashboard near the steering column, approximately the the size of a man's wallet (3"x4") with wires coming out of the side. There is a sticker with a model number and/or a 10-14 character serial number on it.
Will my remote start not work if my check engine light is on?
If the 'Check Engine Light' or Malfunction Indicator Lamp (MIL) is illuminated, the remote start will not work.
Do 2011 Chevy Malibu have remote start?
If you have the 2LT, that will be standard on the vehicle. If you have the 1LT, it only comes with the vehicle if you have the Power Convenience Package. Easiest way to know if a 1LT has that is if the Drivers seat is motorized. If it is, it's got remote start.
How do you start a Chevy Malibu without a key fob?
0:052:57So what we need to do is take our left hand and pull the door handle open just a little bit then we'MoreSo what we need to do is take our left hand and pull the door handle open just a little bit then we're going to push that emergency key all the way in that slot.
How do I know if my Malibu has remote start?
To find out if you have the remote start option, you must first take a look at your key fob. The remote-start button is shaped like a curved arrow. If your key fob has this button, that means that your car is equipped with Remote Start.
Can I replace my remote start fob?
If your vehicle doesn't already have one, you can install a remote starter that comes with either one or two car key fobs, depending on the package you choose.
Can I start my Chevy Malibu with my phone?
The myChevrolet Mobile App† enables you to use your smartphone to interact with your vehicle from wherever you are. You can remote start, unlock and lock your vehicle, view your fuel life and tire pressure and more on properly equipped vehicles.
How long does it take to cool down a car before remote start?
Double check your engine coolant and oil temperatures: If the engine coolant temperature is too high or the oil pressure is too low, remote start is disabled! After you have let the car cool down for 5-10 minutes and rechecked the levels, retry the start procedure.
How long does it take for a car to start when the turn signal is flashing?
Improper Starting Procedure. Hit the lock button once, then hold the remote start button (Usually shaped like an arrow ) for at least 2 seconds or until the turn signal lamps flash. Keep holding and the vehicle should start.