2010 Chevrolet Malibu transponder key blank
- Insert an existing programmed working key into the ignition cylinder.
- Turn ignition to the ON position for 5 seconds, then back to OFF position.
- Remove the existing key and within 5 seconds insert new key and turn it to the ON position for 5 seconds.
- Turn key OFF then back to ON. The key is now programmed. Start vehicle to test the key.
Full Answer
How do you reprogram a 2010 Chevy Malibu key fob?
On the Chevy key fob, press and hold the “Unlock” and “Lock” buttons at the same time until you hear the door lock and unlock again. This means you're all set. Re-insert the programmed key back into the ignition to the “On” position to finish the Chevy key fob programming process.
Does a 2010 Chevy Malibu key have a chip in it?
There is a transponder in the key.
How do you reprogram an ignition key?
Programming a Single KeyInsert the key into the ignition, and turn it to the on position. ... Leave the key in this position for 10 minutes and 30 seconds, and then turn it off.Turn the key back on, and wait for additional 10 minutes and 30 seconds before turning it off again.Repeat the process for a third time.More items...•
How much is a key for a 2010 Chevy Malibu?
We currently carry 1 Key Fob products to choose from for your 2010 Chevrolet Malibu, and our inventory prices range from as little as $62.99 up to $62.99.
How do I program my Chevy key without original?
How to program Chevy key or GM key without original.Insert original key and turn on.Wait 5 seconds or until flashing security light goes off.Within 10 seconds insert new key and turn on.Wait 5 seconds or until flashing security light goes off.Key is now programmed.
How do you start a Chevy Malibu without a key fob?
0:052:57How to Unlock & Start With A Dead Broken Remote Key Fob Battery ...YouTubeStart of suggested clipEnd of suggested clipSo what we need to do is take our left hand and pull the door handle open just a little bit then we'MoreSo what we need to do is take our left hand and pull the door handle open just a little bit then we're going to push that emergency key all the way in that slot.
Can I program my car key myself?
You can't, for example, take a remote for your old car and program it to your new car even if they are the same make and model. With newer cars, most likely you will not be able to program a new key yourself. You will have to visit a dealer or locksmith.
Can you program a chip key yourself?
You don't need a professional transponder key programmer to help you program your transponder. You can do this by yourself, as long as you know the right procedure. The programming process isn't complicated, but your type of car also determines that.
How do you program a car key with only one key?
3:506:26Program Ford Key with only One Key (NO Dealership) & Many ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then insert the key into the ignition. Unlock key goes in the ignition. We need to turn the keyMoreAnd then insert the key into the ignition. Unlock key goes in the ignition. We need to turn the key eight times within 10 seconds and on the eighth time end on the run. Position.
How much does Chevy charge for a new key?
The cost to program a new Chevy key depends on the type of key you need. Chip keys (double cut keys) generally cost around $75, while a laser cut key can run anywhere from $135 to $275. If you need a copy of a Chevy key that you still have the key to, you can simply have a car dealer or locksmith make one.
How much is a key fob for a Chevy Malibu?
Chevrolet Malibu Remote Keyless Entry - Best Remote Keyless Entry Parts for Chevrolet Malibu - from $10.49+ | AutoZone.com.
Does a 2012 Chevy Malibu have a chip in the key?
NOTE: This ignition key has a chip hidden inside of the plastic head. It is a part of your automobile security system to prevent theft. Therefore, you MUST get it both: cut and programmed. Cutting only will NOT allow you to start the engine.
How to program a key fob for a Chevy Malibu?
If You want to progRam a new key fob for Your Chevy Malibu it is a pretty easy process to do Yourself. First You will need to go in Your car and make sure all the doors are closed. Once You are in the car put Your key into the ignition and turn it from on to off then remove it from the cylinder. Next press and hold the unlock button on the driver's door panel and insert and remove the key from the ignition cylinder three times. After that press and hold the lock and unlock buttons on Your new fob until You hear the car beep two times. You can also visit a dealership and they can progRam Your fob using a specialized tool.
How to install a key fob on a Malibu?
You will reach your malibu and close all the doors to install a new key fob in a chevy malibu. Put the key into the ignition. ... Press and hold the "unlock" button on the side door of the driver when inserting and three times removing the key from the ignition. Release tab "unlock." ... Repeat step 4 for any supplementary remotes.
2 Answers
An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
john h
An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.