How much is a fuel line for a 2010 Chevy Cobalt?
As you can see, costs for a Cobalt replacement fuel line are pretty consistent across the board. The Chevy Cobalt uses a single ⅜” supply line, 1 ⅜” vapor line, and a fuel filter....How Much Does a Chevy Cobalt Fuel Line Cost?YearPrice2009$1902010$1904 more rows
Which fuel line is the return line?
The vapor-return line normally runs from the fuel pump or the fuel filter to the fuel tank. This vapor-return line is connected to a special outlet in the fuel pump. Any vapor that forms in the fuel pump returns to the fuel tank through this line.
How do you fix a leaking fuel line connector?
0:0410:40We have four compression fittings we have a tubing cutter. We have a pick or you can use aMoreWe have four compression fittings we have a tubing cutter. We have a pick or you can use a screwdriver whatever the case we're gonna be using a little hacksaw for metal.
Where should the fuel line be connected?
1:525:32Just to the main fuel line and before any fuel line splits. Also be sure to examine the filter for aMoreJust to the main fuel line and before any fuel line splits. Also be sure to examine the filter for a label that shows which side is the inlet. So that it's installed in the correct orientation.
What are the two lines on a fuel pump?
There are only two hoses running from the pump. One is the high pressure line, which sends fuel to the injectors. The other is the return line, which dumps fuel that the injectors don't use back into the tank.
Why does a fuel tank have a return line?
With a return line the fuel pump can provide pressure to the injectors without changing the pressure in the fuel tank. In either case, fuel is departing the tank for good at whatever rate the engine is burning it. Also, liquid gasoline will turn into a vapor, which should offset the negative pressure.
How do you replace an O ring on a fuel line?
0:245:21So as you can see here there are two plastic tabs. That you need to push. Then you wiggle wiggle aMoreSo as you can see here there are two plastic tabs. That you need to push. Then you wiggle wiggle a little bit the shoe. Line. And then it should pop out like this.
Can I use rubber hose to repair fuel lines?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
Can you drive with a leaking fuel line?
It's never safe to drive a car with a fuel leak. Fuel leaks are one of the top causes of vehicle fires. Gas is highly flammable, so it is highly likely that the gas could start a fire, either in the vehicle itself or from the fuel left behind from a leaking vehicle.
What lines connect the engine to the fuel tank?
The fuel line typically consists of rigid metal pipes, with flexible rubber or plastic hoses running from the pipes to the tank and the fuel pump , and from the pump to the carburettor . The flexibility of the hoses allows some movement between these different components.
How do you replace a fuel line?
1:075:07You need the right clamps. I've definitely seen these fail before first of all we want to disconnectMoreYou need the right clamps. I've definitely seen these fail before first of all we want to disconnect the negative side of the battery. Remember. These days you may find that battery in the trunk.
How do you join a fuel line?
3:007:27Connect a current rubber line in your vehicle to a fuel flex. Line. And attach a fuel flex line to aMoreConnect a current rubber line in your vehicle to a fuel flex. Line. And attach a fuel flex line to a brake whip quick connect fuel fitting.