Receiving Helpdesk

2008 cobalt fuel line replacement

by Zachery Hyatt Published 3 years ago Updated 3 years ago

How fuel efficient is the new Chevy Cobalt?

Fuel Economy of Chevrolet Cobalt Cars. Use the following table to research fuel economy of Chevrolet Cobalt cars. Annual fuel cost 1 is based on 15,000 miles, 55% city driving, and the price of fuel is $2.0 per gallon. Annual fuel cost 2 is based on 15,000 miles, 55% city driving, and the price of fuel is $2.5 per gallon.

Is the Chevy Colbalt discontinued?

This sedan was only produced in America for five years before being discontinued. Unlike the Chevy Impala or the Volkswagen Beetle, you won’t find many fans who were sad to see the Cobalt go. The Chevy Cobalt was initially released for the 2005 model year.

How to replace Chevy Cobalt blinker?

Rear Turn Signal Replacement Chevrolet Cobalt (2005-2010)

  1. Getting Started - Prepare for the repair
  2. Remove Bulb - Steps to remove a burnt out bulb
  3. Helpful Hints - How to find replacement bulb type and other hints
  4. Replace Bulb - Procedures to replace the new bulb
  5. More Info. - Additional information on changing rear signals

How long is a Chevy Cobalt?

How long will a Chevy Cobalt SS last? With proper care and maintenance a 2008 Chevy Cobalt should be able to last at least 200,000 miles. The Cobalt has a very simple four cylinder engine in it, and that is a platform that is very easy and affordable to repair if anything goes wrong.

How much is a gas line for a 2008 Chevy Cobalt?

The Chevy Cobalt uses a single ⅜” supply line, 1 ⅜” vapor line, and a fuel filter....How Much Does a Chevy Cobalt Fuel Line Cost?YearPrice2007$1802008$1902009$1902010$1902 more rows

How much is a fuel line replacement?

Fuel hoses can often last a car's whole lifetime without leaking and can be expected to last at least 100,000 to 200,000km. If you need fuel hose replacement, the average cost can vary a lot depending on the make and model, anywhere from $120 to $500 or even more.

Are fuel lines easy to replace?

Replacing the fuel hose on your vehicle is going to take time and patience, and it could require getting underneath the car. It's also going to take the right tools for the job.

How do you fix a leaking fuel line connector?

9:0710:40How To Fix Leaking Fuel Lines | ALL Makes And Models - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll the lights will pop. On. Turn it off do that. Again. Turn it off what that's going to do that'sMoreAll the lights will pop. On. Turn it off do that. Again. Turn it off what that's going to do that's going to pressurize your fuel lines to make sure you don't have any leaks.

How long does it take to fix a fuel line?

Regardless what the back yard wonders will tell you how quickly they can do it, I would say that, if the tank does not need to be removed,they will charge at least 2 hours labour. If the tank needs to be drained, removed and reinstalled, add a couple more.

Can you drive with a leaking fuel line?

It's never safe to drive a car with a fuel leak. Fuel leaks are one of the top causes of vehicle fires. Gas is highly flammable, so it is highly likely that the gas could start a fire, either in the vehicle itself or from the fuel left behind from a leaking vehicle.

Can I use rubber hose to repair fuel lines?

Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.

How do you change a fuel line?

1:594:07How to Replace the Fuel Line in Your Grass Trimmer Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the line in the hole use hemostat forceps or needle nose pliers to reach into the tankMoreOnce you have the line in the hole use hemostat forceps or needle nose pliers to reach into the tank. And grab the fuel line then pull the line through the fuel tank filler opening.

Can you replace metal fuel line with nylon?

One option for replacing metal fuel lines is with a nylon tubing and specific fittings. Nylon tubing can be used for an entire length of fuel line or just a section. This option can be a cost-effective and time-efficient repair when pre-bent lines are not available.

How do you replace an O ring on a fuel line?

0:245:21Fuel Rail quick connect - Dorman Fuel Line Connectors - o-ring replacementYouTubeStart of suggested clipEnd of suggested clipSo as you can see here there are two plastic tabs. That you need to push. Then you wiggle wiggle aMoreSo as you can see here there are two plastic tabs. That you need to push. Then you wiggle wiggle a little bit the shoe. Line. And then it should pop out like this.

Can I use JB Weld to fix a fuel line?

JB weld might work. Rough the surface up real good so the epoxy will have something to adhere to. Use brake clean to clean it.

What causes a fuel line to leak?

According to eHow, fuel lines can develop leaks over time because they are prone to rub against metal under your vehicle. Mechanics stress that fuel lines need to be replaced in full and that damaged sections of the line cannot solely be repaired.

What Is a Fuel Line?

The fuel line is a hose that transfers gas from the storage tank to your engine. Fuel lines attach to pumps that push gas into the engine so the car can run. Given that the fuel line carries all the gas, fuel line problems affect engine performance and efficiency.

How Much Does a Chevy Cobalt Fuel Line Cost?

The Chevy Cobalt is relatively inexpensive to maintain, with an average annual maintenance cost of about $450. However, in some cases, parts for a Chevy Cobalt can be more expensive than equivalent parts for models still in production.

Other Related Costs

Generally speaking, you will not just replace your fuel lines but also replace your fuel pumps and fuel filters.

Factors that Affect the Cost of a Chevy Cobalt Fuel Line

Vehicle age. All other things being equal, older Chevy Cobalt models are cheaper to repair. Newer models have more advanced systems and computer integration which increases labor costs.

Frequently Asked Questions

It will most likely cost you around $400 to replace a Chevy Cobalt. Parts will run you about $100 to $150 while Labor costs anywhere between $200 to $300.

Conclusions

The fuel line is one of the most important parts of your car’s engine, so you want to make sure it is in tip shop shape. The Chevy Cobalt overall is a relatively cheap car to maintain considering that it is discontinued.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9