Important information
There was a problem filtering reviews right now. Please try again later.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
What are the units of fluorescent and LED?
Before you want to understand and use the conversion chart, you must know 2 units of Fluorescent and LED are Lumens and Watts.
How many watts does an LED bulb use?
LEDs have a higher wattage than incandescent bulbs. You can use LEDs equal to 100 watts in a 60-watt fixture. Let me explain. Let’s say your LED is approximately as bright as a 60 Watt incandescent but only uses about 9 Watts of electricity. Use a single outlet floor lamp, rated to handle a maximum energy consumption of 60 Watts.
How to replace fluorescent lamps with LEDs?
One of the most concerning issues when not knowing whether to replace fluorescent lamps with LEDs is how to replace them and what tools to prepare? Among the types of LED lights, LED tube lights are often the best choice when replacing fluorescent lamps.
How long do LED lights last?
The lifespan of modern light bulbs: As you know, the life of LED lights is many times longer than that of fluorescent bulbs, compact bulbs, or other traditional lights, the life of a common LED can be from 25,000 to 50,000 hours. . Meanwhile, the lifespan of incandescent bulbs only lasts from 1,000 to 2,000 hours. Thus, LED lights have beaten traditional lights with a much longer lifespan. Lamp life is one of the factors that make LED technology more and more popular.
What temperature should LED bulbs be?
LED bulbs as well as led chips are very sensitive to high temperatures. If the lamp’s temperature is higher than 85°C, the lamp life will be shortened. And especially when the temperature reaches 105°C, the bulb may stop working. Note that the temperature of the bulb must be lower than 85°C for the lamp to work properly. Therefore, the heat sink of the lamp must have a very suitable structure and work well, especially the large-capacity lamps and lights installed on the ceiling.
Why do LED lights need to be in a cool place?
Heat is considered the main enemy of electronic devices and LEDs are no exception. If the temperature where the bulb is placed is high, it will greatly affect the lifespan and luminous duration of the lamp. For closed installation lamps such as recessed downlights, if you do not dissipate heat well, the ambient temperature of the lights will rise higher, and gradually affect the led chip along with the control process. This will reduce the life of the LED. LED devices need to be installed in a cool, dry space to dissipate heat, cool quickly, and increase lamp life.
What is the most common type of fluorescent light?
Usually, the most popular fluorescent lamps are the 1m2 and 0.6m types. But like other types of fluorescent lamps, they all have a relatively similar structure and installation, including the following cases:
How many lumens does a 100 watt LED bulb have?
At roughly 100 lumens per watt, you have about 1800 lumens, equivalent to a 100 watt incandescent bulb. But of course, different LED power supplies have different efficiencies, so if you have a cheap LED, it might be more equivalent to a 75 watt bulb, or if you have a Dubai bulb, it might be equivalent to a 200 watt incandescent.
Where are 12W LED lights used?
Normally according to the universal wattages of led lights, led panels are mainly used in bedrooms, kitchens and halls. Architects mostly prefer 12W panel in rooms. 12w panel at 4 corners of the room and providing either intermediate wattage panel or COB will fulfil your light requirement.
What is the difference between a downlight and a flashlight?
Therefore, the characteristic of the downlight is that the light angle of the spotlight directly below and around is small. The emitted light is the same as a flashlight. It is a beam of light.
How many watts is 50W?
A ‘50W equivalent’ usually comes in at about 7 watts or so. It’s not possible to be totally exact because of somethings called colour rendition, along with colour temperature. Usually you will get slightly lower lumens per watt from a lower colour temperature LED light.
How many watts should a light bulb be?
So if we took an average on room size we should consider a pair of 12 watts bulb.
How many square feet is a 9 watt LED light?
Note: 9 watts LED satisfy almost all lighting requirements of a general 12feet*12feet or nearly 250 square feet room.
How much light is 60000W/132 sq ft?
Since traditional incandescent light-bulbs are also fairly low intensity of visible light (the majority comes out as infrared “heat”), your equivalent of 60000W/132 sq is 450W/sq ft (4800W/m2), of which 10% is visible, so 45W/sq ft (480W/m2) of visible light. Double that of the sun.
Where are fluorescent bulbs used?
Fluorescent bulbs where once the most popular lighting fixtures in the world. You’ll find them in offices, warehouses, schools, residential, and industrial spaces, but as technology has progressed LED lighting has turned the tide.
What does the T mean on fluorescent lights?
For example, the initial “T” means the fluorescent fixture comes in a tubular shape and the number next to the ”T” is the estimated diameter in inches. If you are unable to find the label for whatever reason, you can just measure to find the correct diameter size.
How big is a T8 LED bulb?
For instance, the more popular and often the best, T8 LED lamps have a one-inch diameter (1/8). While T12 LED lamps are 12/8 and T5 measures 5/8 inches. All these bulbs can be used vice versa so long as they share the same bi-pin connections on the base (the 2 pins at the end of the tube) and have the right milliamp (power supply) requirements.
Why do you want to use the same fluorescent fixtures?
Ideally, you would want to use the same fixtures due to cost and time considerations of changing the fluorescent fixtures. Unfortunately, sometimes there is no choice but to go through a costly conversion process before these newer tubes can work on the existing infrastructure.
Why do people use LED lights?
Many people convert to LED lamps because they have a much longer lifespan, are a brighter light and are a lot more energy efficient. Yet, replacing the fluorescent light fixtures can be a bit more complicated because the technologies are not compatible on their own.
What is the Kelvin of a color?
Color temperature measurement is in Kelvin (K) and most colors range from 2500 to 6500k. A lower Kelvin figure means the color is warm and tends to be closer to orange. By contrast, a high Kelvin figure like 4000k means the color is cool and white in appearance. A Cool “white “ color is ideal for office and shop lights.
Can you replace T8 bulbs with LED bulbs?
If you already have T8 fluorescent tubes and fixtures in place, it can be as simple as swapping those bulbs with LED bulbs without the need to do a ballast bypass as it has an Integrated Driver for use on Existing Fluorescent Ballast. so no rewiring is required.