| Nail Gun | Size (Gauge) | Poplar Usages |
| Brad Nailer | 18 gauge | nailing slim baseboards |
| Finish Nailer | 16, 15, and 14 gauge | baseboards, crown molding, window and do ... |
| Pin Nailer | 21 and 23 gauge | furniture trimming, trim pieces, super-t ... |
| Staple Nailer | 18 gauge | fastening molding and trimming to walls |
Full Answer
What size is 18 gauge Brad?
The Bostitch 18-gauge (BTFP12233) nailer is an air-powered brad nailer that uses 18-gauge brad nails of 5/8-inch to 2-1/8-inch in length. It has a Tool-free jam release mechanism for easy nail removal and prevents jamming.
What size nail is 18 gauge?
You are probably wondering if you need an 18 gauge or 16 gauge nailer for baseboard trims. The 18GA nails work well for trims up to 1/2 inch. For baseboards thicker than 1/2 inch I recommend you go for 16 gauge nail gun. The nails used in a brad nailer are smaller in diameter (0.0475 inches) and have a length of up to 1 1/4 to 2 inches.
What size Brad Nailer do I Need?
- BOSTITCH BTFP02012-WPK 6-Gallon 150 PSI Oil-Free Compressor Kit.
- PORTER-CABLE C2002 Oil-Free UMC Pancake Compressor.
- DEWALT D55140 1-Gallon 135 PSI Max Trim Compressor.
- Excell U256PPE 6 Gallon Pancake Air Compressor.
- Makita MAC2400 Big Bore 2.5 HP Air Compressor.
What do you use a 18 gauge Brad Nailer for?
Brad Nailer Basics
- Gather Your Supplies. Recognizing how to use a brad nailer takes a little preparation to ensure you are ready for your wood molding or trim project.
- Choose Your Brad Nailer. You have two options when it comes to using brad nailers. ...
- Know Which Nail Gun You Need. Brad nailers are quite different than pin nailers, but are often confused. ...
How big is an 18 gauge brad nail?
0.5 to 2.5 inchesAbout 18-Gauge Brad Nailers 18-gauge brad nailers are perfect for fragile pieces making them great for decorative molding, paneling, casing, and trim work. It has a nail length of 0.5 to 2.5 inches and the thickness is 0.0475-inch.
What size nails does an 18 gauge nail gun use?
between 3/8” to 2”What Do You Use a Brad Nailer For? 18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood.
How do you know what size brad nails to use?
The rule is simple: a brad should be three times as long as the thickness of the material you are fixing. Example: if the material is 15 mm thick, the brad should be 45 mm long. Choose a brad gun that takes the length of brad you need.
Which brad nail is bigger 16 or 18 gauge?
18 Gauge Brad Nails: The nails are approx. 1.25mm thick, are smaller and leaves a smaller footprint compared to 16 gauge nails. It leaves a less noticeable hole that can be filled afterwards. If glue is used, then the 18 gauge nails will be well suited to hold the wood together until it dries.
Are all 18 gauge brad nails the same?
It's All About the Gauge Size Most brad nails are made from a very thin 18-gauge wire. Finishing nails typically range from 16 to 10-gauges and are much more robust than brad nails. Finishing nails also come in a wider variety of lengths than most brad nails do; some can be upwards of 3” in length.
Can I use 16 gauge nails in an 18 gauge nail gun?
0:161:29Not as long as the 18 gauge if you snap this pack of nails.MoreNot as long as the 18 gauge if you snap this pack of nails.
What size nail should I use?
The accepted rule of thumb is the nail length should be 21/2 times the thickness of the wood you are nailing through. Thus, for 1-inch-thick material, you would use an 8-penny nail and for 2-inch-thick material, you'd use a 16-penny nail.
Will a brad nailer shoot through 2x4?
These guns usually accept a range of nail sizes, from about 1 inch to as much as 1-1/2 inches, but they do not fire round-headed nails—only finish nails or brads. Cordless battery technology is quickly making itself known in this category, with several very good guns available.
Can you use 18-gauge nails for baseboards?
What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5'' long which is an ideal length for baseboard nails.
Is 16G smaller than 18G?
Small gauges will have a thinner bar but a larger number (like 20G), and large gauges will have a thicker bar but a smaller number (like 14G)....Inches & Millimeters Gauge Conversion Chart:GaugeInchesMillimeters18G.040"1.0mm16G.050"1.2mm14G.064"1.6mm12G.082"2.0mm9 more rows
Is 18 gauge brad nailer good for baseboard?
Can You Use 18 Gauge Nails (Brad Nailer) for Baseboards? Yes, you can use an 18-gauge Brad Nailer for your baseboards. However, it doesn't have the holding power compared to a 15 or 16-gauge nail.
How do I choose a brad nailer?
0:522:07Sometimes you'll also see with any fine woodworking that it may split the wood. So depending on yourMoreSometimes you'll also see with any fine woodworking that it may split the wood. So depending on your application you can choose the right nailer for that one more visit nail gun depot.com.
What size nails do you use for brad nailers?
Brad nailers use smaller 18-gauge nails up to 2 inches long. Because the nails are thinner in cross section, they leave a smaller hole and are less likely to split narrow trim and molding, making them a good choice for stop and cove moldings or baseboard shoe molding.
What is an 18 gauge brad?
18 Gauge BradsStepping another rung up the ladder, we have the very popular 18 Gauge Brad (1.25mm in diameter) finished with a head, these are found in most joinery workshops and are used in moulding, decorative trim, furniture manufacturing,window beading and much more.
How many inches does a 16 gauge nailer shoot?
Like 15-gauge nailers, most 16-gauge guns shoot nails up to 2-1/2 in . You'll pay about the same for a name-brand 16-gauge nailer as you would for a 15-gauge gun. 18-gauge brad nailer. If you plan to buy only one trim nailer, this is the size to get.
What are 18 gauge brad nails?
FastenerUSA supplies only the best 18 ga brad nails for trim carpentry. Our B18 Series 18 gauge brad nail sizes range from 3/8” up to 2” length. What are 18 gauge brad nails used for you ask? 18 gauge brad nails are used in the finish carpentry and trim woodworking industry. 18 gauge nails can be used in projects that require or include moulding or decorative trim, furniture trim, and window beading. 18 gauge nails can also be used for baseboards, blind pinning of upholstered panels, scribe moulding, furniture, cabinet building, and picture frame assembly.
What is the B18 brad?
Two head types of 18 gauge brads are available— B18 series with a standard head (a.k.a. medium head) and AY series with a slight head. The B18 series Standard Head is by far the most popular of 18 gauge brad nails and fits the vast majority of brad nailer brands in the market today.
What brads are compatible with Senco LS2?
Slight Head 18 gauge brads are compatible with only Slight Head brad nailers such as the infamous Senco LS2 and the more recent Senco SLP20XP. In our experience if you're unsure if your brad nailer accepts Slight Head then more than likely it does not. We typically carry only two 18 gauge brad nails sizes in in Slight Head; 1” and 1-1/4”.
Can 18 gauge brad nails corrode?
Electro Galvanization provides a very thin layer of zinc coating with a measure of protection against the elements. Over time galvanized 18 gauge brad nails may corrode with prolong ed exposure to the elements. Not recommended for ACQ Treated Lumber.