Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
| 5/16" | 13mm | 1/2" |
| 3/8" | 14mm | 9/16" |
| 7/16" | 16mm | 5/8" |
| 1/2" | 19mm | 3/4" |
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 5/16" | 13mm | 1/2" |
| 3/8" | 14mm | 9/16" |
| 7/16" | 16mm | 5/8" |
| 1/2" | 19mm | 3/4" |
What is a 14mm socket equivalent to?
The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch. Will a 10mm socket fit a 3 8? So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.
What is the smallest socket size?
Most common dive sizes are:
- 1/4″ drive
- 3/8″ drive
- 1/2″ drive
- other drive sizes
What does 14mm mean for a watch band?
Width is the distance between the lugs, where the strap meets the watch. To determine your width, you can take a ruler or caliper, and measure the width of the part of the strap that uses spring bars / screws to attach to your watch case. Measure this in millimeters.Width is expressed, for example like this: 24/22 (24mm wide by 22mm wide).
What are the socket sizes in order?
Standard Socket Sizes
- 1/4 inch drive (0.6 centimeters)- Works with 4mm to ( 4.5 mm, 5mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 ...
- 3/8 inch drive (0.9 centimeters) – Works with 5.5 mm to 22 mm sockets.
- 1/2 inch drive (1.3 centimeters): Works with 8 mm to 30 mm sockets.
- 3/4 inch drive (1.9 centimeters)- Works with 36 mm to 80 mm sockets.
What is the same size as a 14mm socket?
SAE to Metric Conversion ChartSAEMetricInch13mm0.51217/32"0.53114mm0.5519/16"0.56347 more rows•29-Apr-2020
Are 9/16 sockets the same as 14mm?
14mm = almost 9/16 inch. 15mm = almost 19/32 inch. 16mm = 5/8 inch.
What size is 7/8 in MM?
22.23 mmConversion table inches to mmDimensions — Inches to Metric0.875”7/8”22.23 mm0.938”15/16”23.83 mm1”1”2.54 cm2”2”5.08 cm21 more rows
What is 3/8 of an inch in Millimetres?
Conversion table Inches to mmDimensions — Inches to MetricDecimal InchesFractional InchesMetric0.375”3/8”9.53 mm0.438”7/16”11.13 mm0.500”1/2”12.70 mm21 more rows
What standard size is 14mm?
Metric / Standard Wrench Conversion ChartBolt DiameterMetricStandard1/4"11mm7/16"5/16"13mm1/2"3/8"14mm9/16"7/16"16mm5/8"39 more rows•09-Apr-2020
What is smaller 14mm or 16mm?
Smaller items are usually measured in milimeters as it is a more accurate measurement....MMApproximate Size In InchesExact Size In Inches14mm9/16 Inch0.55118 Inches15mmJust short of 5/8 Inch0.59055 Inches16mm5/8 Inch0.62992 Inches17mmJust short of 11/16 Inch0.66929 Inches21 more rows
What is 4.5 mm in a fraction?
The fraction inches are rounded to 1/64 resolution....Millimeters to inches conversion table.Millimeters (mm)Inches (") (decimal)Inches (") (fraction)4 mm0.1575 ″5/32 ″5 mm0.1969 ″13/64 ″6 mm0.2362 ″15/64 ″7 mm0.2756 ″9/32 ″17 more rows
What is bigger 1 inch or 7 8?
What is this? As you can see, the denominator is the same for both fractions already, so we don't need to convert either fraction. All we need to do is look at the numerators above the fraction line. We can clearly see by looking at the numerators that 7 is greater than 1 which also means that 7/8 is greater than 1/8.
What is MM size?
The millimetre (international spelling; SI unit symbol mm) or millimeter (American spelling) is a unit of length in the metric system, equal to one thousandth of a metre, which is the SI base unit of length. Therefore, there are one thousand millimetres in a metre. There are ten millimetres in a centimetre.
What is 16th of an inch?
The small lines halfway between each 1/8 of an inch denote 1/16 of an inch. These are also the smallest lines on the ruler. The very first line on the left hand side of the ruler is the 1/16 of an inch mark.21-May-2020
Is a 3/8 the same as a 10mm?
It's the same size. 3/8 is in inch and and its 10mm.17-Oct-2011
How many mm means 1 inch?
25.4 millimeters1 inch is equal to 25.4 millimeters, which is the conversion factor from inches to millimeters.
What is the difference between a 12 point socket and a 6 point socket?
You can slip it over the hardware in any one of 12 positions, which makes it easier to align. While 12-point sockets are well suited for most light and household tasks, six-point sockets, on the other hand, have been chosen for more significant hardware situations that require substantial torque.
What are some examples of impact sockets?
Impact sockets are made in such a way they work with these other tools. A prime example is an electric or pneumatic impact wrench. If you use these, you will need a socket sets built to withstand these higher torques.
Can you use a wrench in a shed?
Using a wrench can be accessible when you need to tackle jobs in your shed or around the home. However, when you have many varying sizes to work on, you can quickly overload your portable workbench.
Can you touch a nut in a shallow socket?
Conventional shallow sockets may not touch a nut or bolt before the top of the stud or bolt hits the top of the socket, or you are working in a confined space. Spark plug sockets are a good example, as are some wheel nuts.
Standard Socket Sizes
Four of the most common socket drive sizes and the typical range of applicable socket sizes
Socket Type
In addition to the varying sizes, these sockets are also available in different shapes to fit the varying bolt heads. These shapes include-
Converting a Standard Socket Size to a Metric Socket Size
As a large part of the world is replacing the standard socket size with the metric ones, it is extremely necessary to be able to properly convert (back and forth) between these two primary measurements. The size of a metric socket ranges between 3mm and 13mm.
Things to Keep In Mind While Choosing a Socket
While the standard sized sockets are the most conventional socket variant, most of the modern vehicles largely rely on the metric hardware that is measured in mm. You can choose a metric or a standard sized socket depending on your needs.
What size breaker is used for a radial socket?
In Europe and North America, the commonly used circuit breaker size for radial socket outlets in the electric distribution board (consumer unit) is either 20A or 25A. Whereas in Britain, a ring socket outlet circuit will use a 30A or 32A circuit breaker (or fuse).
How many inches is a standard socket?
A standard 13/32 ( inch) socket will work, if you can find one. However, it is rarely, if ever, used or produced. Further, it is still not an exact, proper fit or substitute. 25.4 mm = 1 inch.
How many countries have adopted the metric system?
That is why most of the World has standardized on Metric measurements. . . I believe all the 198 countries around the world have adopted the Metric measurement and the SI units, only America and one other country have not changed to Metric.. . They are years behind the rest of the world. 9.9K views.
Why is 1.5 a better standard?
Until about 10 years ago 1.5 used to be the standard, the reason it was upped is because newer houses are insulated a lot better, providing much worse cooling, also the amount of wiring increased and a lot of wiring is ran in the same conduit resulting in increased heating .
Can you use SAE sockets on metric bolts?
But to use a SAE socket on a ‘metric bolt head’ will round off the edges, since two much force will be distributed over too small an area of the bolt. Funny enough though, in ‘metric’ countries, the driver for the sockets is either 1/4 inch or 1/2 inch, even though the ‘socket’ head is in metric dimensions.
Is bare earth wire a hazard?
Note the bare earth wire, which poses no immediate hazard, but may be subject to corrosion in really poorly assembled conduits within damp walls . What is not obvious in any of the pictures is that the end of each coloured wire is stripped of its insulating layer of plastic (for a distance of about 1 cm/0.4 inch).
Can a 3-pin plug be rewired?
These plugs are not recommended to be rewired in general.
What is a 10mm socket?
A 10 mm socket is a standard sized socket and extremely common on automobiles for DIY accessible parts. If you work on cars and don’t have metric sockets, get a set. They’re cheap. If you are really hard up for cash, just buy a 10 mm socket with the right drive size. It’s extremely common in the smaller metric wrenches and used a lot on cars, ...
Can you use SAE sockets on metric bolts?
But to use a SAE socket on a ‘metric bolt head’ will round off the edges, since two much force will be distributed over too small an area of the bolt. Funny enough though, in ‘metric’ countries, the driver for the sockets is either 1/4 inch or 1/2 inch, even though the ‘socket’ head is in metric dimensions.
How high should a flex wire be?
Because the flex comes out the bottom, the wiring regulations (Electric code) requires a minimum height of 150mm above a horizontal surface. In the UK the wiring regulations are mandatory everywhere; in the US the NEC (National Electrical Code) has to be adopted by each local city or county board.
What is a 20 amp breaker?
1 It is fused. Unfused plugs rely on the circuit breaker in the breaker box to protect the circuit. In the US this is typically a 20 Amp beaker for a 15 amp circuit and 30 Amp breaker for a 20 Amp circuit. 20 Amp circuits are not commonly used in residential property.
How many amps can a ring circuit cut?
These breakers can cut power at a relatively low amperage, commonly 10–20 amps.
Is SAE wrench metric or metric?
Notice that the SAE (fractional inch) wrench sizes are not exactly equivalent to metric sizes. In some cases the “equivalents” are close enough to be interchangable usually. The problem will come when you have a stuck nut or bolt. Then the wrench may slip and round the nut or the head of the bolt.